KNX Systems
One protocol for every part of the building.
KNX is the open standard that lets your lighting, blinds, HVAC, access and energy systems work as one. We are KNX-certified partners — we design, programme and commission the bus the right way the first time.
Discipline
KNX Systems
● Available now
What's included
Everything in one quote.
Below is the full scope of what we deliver under the knx systems banner. Most clients pick a subset — we'll talk through which parts make sense for your building and budget on the first visit.
Lighting & scenes
Mono-PERC and TOPCon panels from tier-1 manufacturers. Sized to your roof, your shading and your consumption — never sold by the kilowatt.
HVAC integration
Room-by-room heating and cooling with presence-aware setbacks. Talks natively to most heat pumps, ventilation and underfloor systems.
Access & security
Doors, gates and presence-sensing tied to the alarm. Geofencing arms the house when you leave; doorbells route to your phone.
Energy management
Live consumption per circuit, with automation rules to shift loads onto solar surplus. Pairs cleanly with our PV systems.
Our process
From walk-through to handover.
Survey
We walk the rooms with you and map every device that should be on the bus.
ETS design
Topology, group addresses and parameter sets — drawn in ETS before a single cable is pulled.
Install
Bus and DALI cabling, KNX actuators in the consumer unit, sensors in every room.
Commission
On-site programming, walk-through and a 14-day tuning window included on every job.
Case study
Office floor automation, Berlin Mitte
A 1,400 m² shared workspace wanted a single touch-panel-and-app stack for lighting, blinds, AC and meeting-room booking. We commissioned a KNX backbone with DALI lighting and a custom visualisation that the office manager actually enjoys using.
Bus devices
Energy reduction
Commissioning
Why clients choose us
The benefits
Common questions
You asked, we answered.
Don't see your question? Drop us a line — a real engineer will reply within one working day.
New build only, or can you retrofit?
Both. About 60% of our KNX work is retrofit. We can use radio-KNX where pulling cable is impractical, and combine wired and wireless on one project.
What if I don't want everything automated?
Good — most clients only want a few things automated. KNX is great for that because you can add later without rewiring. Start small.
Will I get locked in to your company?
No. KNX is an ISO standard. Any KNX integrator can pick up our project file. We hand over the ETS file at handover, every time.
Can it work with Apple Home / Google Home?
Yes — we install a gateway on most projects so you can mix voice control with the wall panels and phone app.
Let's Talk
Want a building that runs itself?
No-pressure site visits. Itemised quotes. Honest timelines.